Estink MMDVM Hotspot,Support PI-STAR, digital amateur mode DMR, D-STAR, P25 and YSF, with antenna + 8G TF card, suitable for Raspberry Pi,built-in WiFi

Product Information

This simple creation has put the power back into the hands of radio operators around the world allowing them to build and tinker with digital voice systems, breaking down the barrier of needing expensive commercial hardware. A web interface that can be accessed from a smart phone or computer to control the node remotely with real-time activity. To do this, I’ve found the easiest route is to go to this page and use the utility to build a configuration file.

The success of the MMDVM Project comes from countless hours of work by different people and projects going back to the earliest days on D-STAR. The programming of this hotspot is to be carried out by the user according to the digital network used.We can also see the Display setting here too but for now we will just leave this and come back to it a little later on. The size is perfect for mounting on a Raspberry Pi Zero W and I had one spare so it only took a few minutes to solder the header and the socket in place and I quickly had a unit ready to go. Begin December 1, 2019, I will continue update this WIKI page instead of Google blog, I am working on MMDVM just for my hobby, I am happy to share my knowledge and resources about MMDVM open source project.

NOTE: FM Mode just work in Motorola GM338 GM340, GMxx,CDM1250, CDM1550 Serial now, NOT work in YAESU ,ICOM, KENWOOD.Plug the MMDVM into the PI: Depending on which MMDVM you go with, either plug it into the GPIO pins of the Raspberry PI or the USB port.

The hangtime is the amount of time the MMDVM will stay in that mode before allowing other digital mode signals a chance to reach the repeater. You can mail the item back in the original package without any wear and tear for a free replacement.On DSUB-25 accessory connector: GND = Pin 7, Tx_Audio = Pin 8, RX_Audio = Pin 9 , PTT = Pin 19, COS = 17. Hey all So I am helping a friend design/create a digital repeater (primarily for the DMR mode) to be used as a portable (maybe airborne) setup but have run into a radio decision snag. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.